Views: 0 Author: Site Editor Publish Time: 2022-06-10 Origin: Site
Sliding windows mainly refer to doors and windows whose sashes are vertically pushed and pulled left and right along the horizontal direction. The sliding window adopts the sash equipped with pulley to slide on the track on the window frame.
How to deal with the deformation of plastic steel doors and windows of sliding windows
How to do the daily maintenance of sliding windows
How to do the sound insulation of sliding windows
Plastic steel doors and windows are deformed. We all know that the sliding window is made of plastic, and the surface of the plastic is easily weathered and deformed after a long time. I have been engaged in the production of doors and windows for many years. I often help others to repair some problems of plastic-steel doors and windows. It is a common problem that the plastic-steel windows are pushed down due to deformation. , a collision occurs.
Solution: Remove the plastic-steel window of the sliding window, and use external force to correct the window sash to a straight face until it does not spring back. However, this method can only solve the problem for a period of time. Due to the material, the previous bumping phenomenon will occur after a long time. The most effective method is to replace the doors and windows.
1. When the sliding window is in use, the sliding track should be cleaned frequently to keep it clean, so that there are no hard particles on the surface of the track and in the groove.
2. The plastic steel doors and windows are equipped with drainage systems in the window frame, window sash and other parts to ensure the air tightness and water tightness of the doors and windows. Users should not block the drainage holes of the doors and windows during use, so as not to cause the drainage performance of the doors and windows to decline.
3. When pushing and pulling the sliding window, the force point should be in the middle or lower position of the window sash. Do not use too much force when pushing and pulling, so as not to reduce the service life of the window sash.
4. The gauze fan can remove the glue strip fixing the gauze by itself, take off the gauze, and wash it with water-soluble detergent respectively.
5. When the screen fan of the sliding window is in use, please pay attention to coincide with the vertical frame of the inner rail sliding fan, so as to maintain a good sealing performance.
One of the most suitable methods for sound insulation treatment of sliding windows is to add a layer of ordinary plastic-steel windows, but this method is suitable for the case where the outdoor traffic noise is not particularly serious, and if the windowsill in the home is relatively wide, it can be installed on the inside of the original window. Or add a layer of ordinary plastic-steel windows on the outside.
Plastic steel windows should be well sealed, and the cavity distance between the two layers of windows should preferably be more than 10 cm. The sealing of casement windows is better than that of sliding windows, so it is best to choose casement windows for additional windows. This kind of plastic steel window is relatively low in cost.
Topbright Building Materials Co., Ltd. has worked on the development and production of sliding windows for many years, and it will commit to satisfying customers from every field.
